2790 Sherwin Ave. - Unit 13 Ventura, CA 93003 Phone: (805) 469-0477 Fax: (805) 650-6330 |
Master Parts List
To place an order, call or email. Please specify part number and quantity.
An invoice showing total cost will be sent by email.
Shipping is UPS ground or USPS (2 to 7 day delivery) unless otherwise requested.
NOTE: This is a master parts list from Maico. Some items may no longer be available new. Call or email for the availability of good used parts and pricing. Pricing subject to change without notice.
Part # | Description | Price |
Part # | Description | Price |
|
15 | Handle bar rubber bushing | 5.10 |
3276 | Distance spacer 115mm | 22.50 |
|
33 | Rear fender 77 (red) | 39.50 |
3277 | Rear axle completel 75-81 | 49.00 |
|
49 | Fork slider | 99.00 |
3280 | Hexagon screw M 7x40 | 0.88 |
|
50 | Fork seal 36x47x7 | 13.75 |
3292 | Clutch spring | 2.30 |
|
64 | Main fork tube | 165.00 |
3293 | Washer | 8.98 |
|
65 | 250 Cylinder head gasket | 12.30 |
3296 | Nilos ring | 11.07 |
|
72 | Steering stem nut | 10.80 |
3297 | Steering bearing | 23.60 |
|
73 | Fork cap cpl | 37.80 |
3300 | Light switch | 26.36 |
|
78 | Hexagon nut M 8, 14mm | 2.48 |
3304 | Speed o drive 77-79 | 75.00 |
|
79 | Cyl gasket 250 square barrel | 3.95 |
3317-312 | Needle jet 3.12 | 6.91 |
|
80 | O ring 29 x 2.5 | 1.10 |
3317-314 | Needle jet 3.14 | 6.91 |
|
83 | Fork boot | 65.95 |
3317-316 | Needle jet 3.16 | 6.91 |
|
85 | Clamp, hose | 5.05 |
3317-318 | Needle jet 3.18 | 6.91 |
|
87 | Ball bearing cage assy | 6.60 |
3317-320 | Needle jet 3.20 | 6.91 |
|
108 | Swing arn bush | 38.00 |
3317-324 | Needle jet 3.24 | 6.91 |
|
109 | Spacer tube | 8.80 |
3317-326 | Needle jet 3.26 | 6.91 |
|
110 | Swing arm spindle | 42.50 |
3331 | Shock for float needle | 1.80 |
|
111 | Nut for swing arm spindle M 14x1.5 | 4.84 |
3333 | Throttle slide MD 250 | 23.20 |
|
113 | Damper cpl girling | 110.00 |
3334 | Jet needle MD 250 | 3.96 |
|
115 | Ball race-inner | 15.50 |
3353 | Inside ring 12x16x12 | 24.90 |
|
116 | Ball race-outer | 15.50 |
3356 | Gasket, clutch cover | 7.70 |
|
118 | Crank seal-outer | 7.90 |
3359 | Fork seal 38x50 | 9.35 |
|
131 | Front fender | 49.50 |
3366 | Retaining ring 34x1.5 | 1.76 |
|
133 | Lever pivot screw with nut | 2.80 |
3367 | Damper insert | 11.88 |
|
141 | Rear fender | 49.50 |
3369 | Valve seat | 11.62 |
|
145 | Clutch lever assy-old style | 46.50 |
3375 | Spring ring 26 | 1.00 |
|
146 | Brake lever assy-old style | 41.75 |
3389 | Clutch bush | 12.20 |
|
148 | Decompression lever cpl | 21.00 |
3390 | Inner clutch disc | 8.80 |
|
148A | Decompression lever only | 13.20 |
3391 | Terminal plate | 67.16 |
|
151 | Brake cam | 37.85 |
3396 | Clutch disc outer | 15.88 |
|
152 | Brake shoe small (pr) | 39.60 |
3397 | Tension ring | 13.00 |
|
162 | Spoke 3.5x195 LG F. hub | 2.38 |
3402 | Shift segment | 43.30 |
|
163 | Spoke nipple M 3.5 | 0.70 |
3406 | Gear rack cpl | 74.93 |
|
167 | Rim strap | 22.00 |
3410 | Hooked ratchet M | 9.10 |
|
178 | Rear brake plate (casting) | 70.50 |
3414 | Shift fork | 78.20 |
|
183 | Spacer bush for brake plate | 3.20 |
3415 | Pawl pin | 20.90 |
|
187 | Rubber washer | 0.60 |
3416 | Locking screw | 10.80 |
|
188 | Rear brake shoe (PR)+B80 | 40.50 |
3422 | Compression spring | 1.98 |
|
189 | Use P/N 1323 | 3423 | Ignition cover 125 | 34.10 |
||
205 | Ball bearing 6303 2 RS C 3 | 21.00 |
3433 | Mainshaft "MG" | 113.00 |
|
208 | Spoke short 4x152 STL HUB | 2.30 |
3434 | 3rd gear MS 24T M | 94.65 |
|
209 | Spoke long 4x210 STL HUB | 2.30 |
3435 | 4th gear MS 26T M | 97.10 |
|
210 | Spoke nipple M 4.0 | 0.90 |
3438 | 1st gear LS 26T M | 97.10 |
|
211 | Sprocket 59T | 53.50 |
3439 | 2nd gear LS 23T M | 93.80 |
|
212 | Cable Adjusting screw with nut | 7.00 |
3440 | 2nd gear MS 21T M | 101.90 |
|
223 | Use P/N 7841 | 3441 | 1st gear MS 19T M | 89.20 |
||
225 | Use P/N 8897 | 3442 | Twin gear LS 21/19T M | 104.20 |
||
226 | Fork stop locking bolt | 9.40 |
3443 | 3rd gear MS 23T G | 160.70 |
|
235 | Brake rod | 15.40 |
3446 | 1st gear LS 28T G1 | 104.00 |
|
236 | Extension spring | 5.50 |
3447 | 2nd gear LS 24T G1 | 91.50 |
|
237 | Clamp | 7.00 |
3448 | 2nd gear MS 20T G | 176.67 |
|
240 | Rear axle | 44.00 |
3449 | 1st gear MS 17T G | 104.70 |
|
241 | Use P/N 9411 | 3450 | Rwin block gear 21/18T G | 137.15 |
||
242 | Compression Spring | 4.05 |
3454 | Sleeve pinion plug | 2.76 |
|
243 | Wing nut | 10.00 |
3456 | Washer 2nd gear | 0.99 |
|
244 | Nipple holder | 4.60 |
3463 | Ball bearing-slv pinion 6005 2RS | 31.30 |
|
250 | Brake rod clevis securing clamp | 10.95 |
3465 | Sprocket 13T ( PN 851-13T ) | 26.95 |
|
257 | Contact point bracket | 10.00 |
3466 | Needle gauge 17x21x13 | 14.66 |
|
258 | Contact point arm | 10.00 |
3469 | Crank seal 25x52x9 | 12.35 |
|
260 | Primary Coil | 67.70 |
3471 | Kick shaft only - w/grooves | 116.00 |
|
263 | Breather tube 4x1.5 | 2.96 |
3472 | Uses P/N 3472 + 761 | 278.70 |
|
277 | Sealing ring A 8x11.5 | 1.18 |
3482 | Spacer bush for swing arm | 9.30 |
|
285 | Crank pin 250 | 29.60 |
3488 | Swing arm plastic pad | 4.31 |
|
288 | Sprocket 52 T | 69.50 |
3491 | Swing arm axle | 48.10 |
|
289 | Nut rim lock | 2.96 |
3498 | Crankcase gasket | 9.90 |
|
298 | Exhaust flange gasket | 5.75 |
3504 | Kickstarter shaft 125 | 95.20 |
|
302T | Terrycable brake-small HUB | 32.95 |
3505 | Chain guide cpl | 102.75 |
|
303T | Terrycable clutch old case | 32.95 |
3527 | Tank rubber pad | 4.62 |
|
305 | Use P/N 315 | 3529 | Washer spacer | 3.52 |
||
308 | Air box thru 73 | 105.50 |
3530 | Rubber sleeve for cable | 3.30 |
|
311T | Terrycable clutch 72-77 | 32.95 |
3563 | Foot peg | 28.05 |
|
315 | Decompression cable | 16.75 |
3566 | Foot rest return spring R | 4.62 |
|
316 | Head stay 250 Sq. Bl. | 18.80 |
3568 | Foot rest return spring L | 4.62 |
|
318 | Cyl sleeve 250 Sq. Bl. | 140.90 |
3576 | Connector 6,3-1 | 1.00 |
|
319Y | Number plate F yellow | 11.00 |
3583 | Flat connector bush | 1.98 |
|
323 | Identification plate | 3.30 |
3595 | Connector 9.5D 46247 | 1.32 |
|
325 | Rubber cable holder | 0.70 |
3596 | Isolation bush red 15-1` | 1.64 |
|
339 | Ball bearing 6303 CS | 15.90 |
3597 | Isolation bush red 16-1` | 1.64 |
|
342 | Air filter cover | 7.70 |
3598 | Use P/N 7599 | ||
343 | Air boot | 25.51 |
3600 | Motoplat coil | 158.00 |
|
348 | Clamp | 5.40 |
3630 | Clutch lever | 31.77 |
|
375 | Ball bearing 6206 2RS C3 | 22.20 |
3697 | Head stay 250 thru 77 | 31.00 |
|
386 | Sprint, stand | 4.05 |
3706 | Spacer ring | 7.70 |
|
388 | Rubber ring | 0.808 |
3708 | Chain 520z118 L | 122.55 |
|
398 | Ignition Cover | 54.30 |
3709 | Side panel R-white 75 | 33.00 |
|
402 | Crankcase gasket 250 | .80 |
3710 | Side panel L-white 75 | 33.00 |
|
403 | use P/N 707 | 3711 | Plastic screw 6x22 | 1.89 |
||
406 | Ventilation hose | 4.40 |
3720 | Sprocket 14T ( PN 851-14T ) | 27.95 |
|
407 | Copper sealing ring 6x10 | 1.10 |
3721 | Sprocket 15T ( PN 851-15T ) | 27.95 |
|
408 | Oil filler plug 20x1..5 | 15.50 |
3722-12T | Sprocket 12T ( PN 851-12T ) | 27.95 |
|
409 | Sealing ring 20x24 | 1.35 |
3722-11T | Sprocket 11T ( PN 851-11T ) | 27.95 |
|
410 | Sealing ring 14x18 | 1.10 |
3723 | Washer | 1.58 |
|
413 | Crank pin 25x48 | 27.40 |
3736 | Speedo cable vdo drive | 18.00 |
|
414 | Crankshaft 501 | 874.50 |
3738 | Screw M 4.8x13 | 1.20 |
|
423 | Rod bearing 25x31x17 | 34.50 |
3757 | Needle cage K 20x24x12 | 17.14 |
|
424 | Needle bearing KBK 18x22x24 | 14.40 |
3790 | Fork tube 75-78 | 147.50 |
|
425 | Crankshaft bearing right 6305 | 26.50 |
3795 | Roller bearing | 43.94 |
|
426 | Crankshaft bearing right NU 305 C3 | 55.95 |
3797 | Seal ring | 17.64 |
|
427 | Crank seal Sq. Bl. | 15.05 |
3805 | Cover for air filter ++++++++++ | 16.50 |
|
430 | Sealing ring 8x14x1 | 1.10 |
3830 | Clutch lock tab tool | 51.00 |
|
431 | Spacer crankshaft | 11.40 |
3867 | Compress spring for kickstarter | 5.50 |
|
432 | Lock tab crankshaft | 1.50 |
3872 | Spacer bush cpl | 28.20 |
|
437 | Clutch lever-Radial | 22.10 |
3880 | Rear wheel spacer 19.5 mm | 11.80 |
|
438 | Kickstarter ratchet plate | 38.75 |
3882 | Puller for motoplat | 37.60 |
|
439 | Kickstarter ratchet pinion | 53.40 |
3889 | Chain protector GS | 43.26 |
|
443 | Duplex primary chain 3/8x7/32 | 60.10 |
3891 | Spacer roller | 8.46 |
|
444 | Thrust washer | 6.50 |
3893 | Washer 16x27x1.0 | 4.75 |
|
445 | Bushing, clutch bronze | 7.40 |
3907 | Fork seal/wiper 76-77 | 25.04 |
|
447 | Lock plate for guide nut | 3.10 |
3913 | Damper buffer ring | 2.64 |
|
448 | Clutch guide nut | 10.05 |
3932 | Needle bearing swing arm HK 2030 | 20.74 |
|
449 | Cup spring | 2.45 |
3936 | Swing arm plastic pad AW | 10.25 |
|
457 | Fiber clutch disc SC | 25.70 |
3958MOR | Air box 76-77 | 83.00 |
|
458 | Steel friction disc SC | 28.30 |
3967 | 3th gear MS 23T R | 141.25 |
|
459 | Inner disc | 12.40 |
4081 | Crankshaft exchange 250 | 246.00 |
|
460 | Terminal disc | 19.60 |
4083 | Crankshaft exchange 490 | 319.00 |
|
461 | Clutch clip | 5.90 |
4086 | Connecting rod 250 | 161.00 |
|
462 | Clutch spindle | 58.05 |
4088 | Connecting rod 500 | 249.00 |
|
463 | Spindle bolt | 5.90 |
4089 | Crankshaft exchange 250LC | 247.00 |
|
464 | Clutch spindle seal ring | 1.35 |
4152 | Oval decal Yellow | 4.95 |
|
465 | Use P/N 2898 | 4153 | Oval decal Green | 4.95 |
||
467 | Exhaust flange | 42.10 |
4155 | Oval decal White | 4.95 |
|
475 | 400 Cylinder Sq. Bl. | 248.00 |
4162 | Connecting rod cpl 400-490 | 198.50 |
|
479 | Gasket-cyl base 360 | 3.74 |
4163 | Connecting rod cpl 250 | 193.50 |
|
480 | Head gasket 360-400 Sq. Bl. | 11.80 |
4164 | Connecting rod cpl 501 | 319.00 |
|
482 | Intake gasket | 4.40 |
5011 | Lock nut M 14x1.5 | 1.98 |
|
484 | Felt pad | 1.10 |
5015 | Buffer block chain tensioner | 12.40 |
|
486 | Front brake cable thru 79 | 12.80 |
5018 | Chain tensioner cpl | 41.50 |
|
486T | Terrycable F. brake thru 79 | 32.95 |
5020 | Spring chain tensioner | 6.38 |
|
490 | Mainshaft 17T T | 114.30 |
5023 | Cable bush | 5.30 |
|
492 | Retainer ring | 0.96 |
5029 | Plastic spacer | 1.56 |
|
494 | Sleeve pinion 22T T | 131.10 |
5031 | Lock nut M 10x1.25 | 1.65 |
|
497 | Layshaft 13T T | 94.5 |
5033 | Kickstarter Lever upper | 107.80 |
|
498 | 3rd Gear LS 16T T | 78.90 |
5034 | Kickstarter joint | 104.80 |
|
499 | Ball bearing 6005 2RS | 22.40 |
5035 | Kickstarter lever cpl | 154.00 |
|
501 | Oil seal 30x40x7 | 7.60 |
5038 | Cylinder sleeve 250 | 151.45 |
|
502 | Spacer pinion | 7.60 |
5050 | Use P/N 8944 | ||
503 | Sprocket 12T 4 spd. | 26.55 |
5093 | Brake pedal bush 6.5x12x28 | 4.84 |
|
504 | Use P/N 3254 | 5149 | Front brake plate only | 62.20 |
||
505 | Crank nut | 7.99 |
5160 | Tension spring exhaust | 10.95 |
|
506 | 3rd Gear MS 22T 4 | 56.80 |
5192 | Seat cpl 77-79 | 110.00 |
|
507 | 1st Gear LS 20T T | 77.10 |
5193 | Seat base 77-80 | 68.00 |
|
508 | 2nd Gear LS 18T 4 | 54.80 |
5194 | Seat foam | 97.00 |
|
509 | Ball bearing mainshaft | 18.45 |
5195 | Use P/N 6527 | ||
510 | Sleeve pinion bronze bush | 4.50 |
5197 | Seat Bracket | 30.00 |
|
512 | 538 shim 24x16.2x.3 mm | 0.98 |
5204 | Foam seal 5x20 | 4.40 |
|
513 | Needle bearing H K 1612 | 16.46 |
5302272 | Needle jet 272.2 | 6.34 |
|
514 | Needle bearing BK 1616 | 18.96 |
53022274.2 | Needle jet 274.2 | 6.34 |
|
516 | 13T Sprocket 4 spd | 27.50 |
5302276.2 | Needle jet 276.2 | 6.34 |
|
517 | Decompression rel valve cpl | 81.45 |
5302278.2 | Needle jet 278.2 | 6.82 |
|
520 | Decompression spring | 7.28 |
5302280.2 | Needle jet 280.2 | 6.34 |
|
521 | Valve | 8.48 |
5302282.2 | Needle jet 282.2 | 6.92 |
|
522 | Piston Std 66.95 Wiseco | 184.20 |
5323 | #1 Jet needle | 4.62 |
|
523 | Piston Ring 67.00 | 89.10 |
5325 | Air screw | 4.40 |
|
524 | 14T Sprocket 4 spd | 27.45 |
5326 | O-ring | 1.76 |
|
527 | Mainshaft 14T S | 72.20 |
5327-1401 | Slide #140-1 | 44.75 |
|
528 | 2nd Gear MS 18T 7 | 79.95 |
5327-220 | Slide #220 | 35.35 |
|
529 | 3rd Gear MS 21T 7 | 102.85 |
5329 | Plastic screen | 3.87 |
|
530 | 1st Gear LS 23T 7 | 77.10 |
5330 | Guide block | 5.50 |
|
531 | 2nd Gear LS 19T 7 | 77.75 |
5331 | Return spring type 55 | 2.11 |
|
532 | Piston ring 67.00 | 25.25 |
5332 | Cover plate | 16.50 |
|
533 | Piston 76.93 | 206.50 |
5333 | Float needle | 21.90 |
|
534 | Piston ring 77.00 | 48.05 |
5334 | Clamp ring-carb | 11.20 |
|
535 | Piston pin 18x58 | 21.26 |
5335 | Tickler button | 10.34 |
|
535W | Piston Pin 18x63 | 13.75 |
5336 | Tickler spring | 0.79 |
|
536 | Circlip D18 | 1.10 |
5337 | Cotter pin | 0.44 |
|
536W | Write Pin Clip-Wiseco | 1.10 |
5339 | Carb bush 36 | 15.29 |
|
537 | Piston pin 18x66 | 25.20 |
5342 | Carb bush 40 | 16.92 |
|
538 | Layshaft shim .50mm | 1.10 |
5343 | Pilot jet screen | 7.15 |
|
539 | Alloy R. brake pedal | 52.80 |
5344 | Bush | 7.15 |
|
540 | Brake pedal outside collar | 11.00 |
5345 | Rubber washer 12x30x5 | 0.77 |
|
543 | Washer for brake pedal | 1.80 |
5358 | Rubber insert | 7.48 |
|
547 | Oil seal 52x32x7 | 15.35 |
5360 | Connecting rod 125 | 170.50 |
|
548 | Crank seal radial 25x35x8 | 11.95 |
5361 | Rotary valve cover cpl | 135.05 |
|
550 | Spacer washer | 1.14 |
5364 | Rotary valve plate | 14.64 |
|
555 | Use P/N 2327 | 5365 | Rubber seal-intake | 6.38 |
||
555A | Shift lever-folding SC+B421 | 27.50 |
5370 | Cylinder base gasket | 2.40 |
|
556 | Shift lever rubber | 7.70 |
5396 | Use P/N 9125 | ||
557 | Shift shaft-old case | 39.60 |
5399 | Electronic box-Bosch | 141.50 |
|
563 | Pull rod-Sq. Bl. | 17.10 |
5429 | Clamp SP 28/15 | 5.68 |
|
571 | Use P/N 2220 | 5430 | Asbestos washer 8x25x2 | 1.10 |
||
572 | O Ring Seal | 1.10 |
5453 | Silencer bush | 4.40 |
|
573 | Spring shaft return | 5.95 |
5474 | Clamp 35/15 | 8.68 |
|
575 | Hook ratchet | 17.90 |
5527 | Piston 53.96 | 172.00 |
|
576 | Spring hooked ratchet | 6.85 |
5528 | Piston ring 54.00 | 52.10 |
|
578 | Kick Shaft cpl w/o gear | 96.95 |
5531 | Piston 34.11 | 172.00 |
|
579 | Locking plate | 0.70 |
5532 | Piston 55.23 | 172.00 |
|
582 | Spring tension lever | 0.90 |
5592 | Spring cup | 8.41 |
|
586 | Use 586T or 586R | 5593 | Spring clip | 1.23 |
||
586R | Shift fork type 4,7,U,K,U1 | 102.70 |
5596 | Layshaft bearing | 27.45 |
|
586T | Shift fork type T,S,TN | 102.70 |
5597 | Layshaft (MT 1) | 74.95 |
|
587 | Spring ring | 1.10 |
5598 | Layshaft bearing | 23.40 |
|
589 | Ignition wire | 5.50 |
5625 | Spacer bush CEV | 8.65 |
|
591 | Rubber plug | 1.40 |
5697 | Layshaft GT1 | 79.60 |
|
592 | Rotor bolt | 4.40 |
5708 | Exhaust manifold | 51.00 |
|
596 | Condenser | 11.82 |
5718 | Clutch guide | 70.15 |
|
600 | Rubber sleeve | 2.10 |
5720 | Push pin | 27.50 |
|
609 | Points assy. | 15.20 |
5721 | Terminal plate | 67.16 |
|
615 | Carburetor housing | 68.85 |
5726 | Piston ring 82.40 | 51.05 |
|
620 | Clamp screw | 2.65 |
5728 | Piston ring 82.80 | 51.05 |
|
621 | Clamp nut | 1.45 |
5729 | Piston ring 83.00 | 51.05 |
|
622-2.70 | Needle jet 2.70 | 4.95 |
5729.1W | Piston ring 83.50 Wiseco | 35.00 |
|
622-2.75 | Needle jet 2.75 | 4.95 |
5729.2W | Piston ring 84.00 Wiseco | 35.00 |
|
622-2.85 | Needle jet 2.85 | 4.95 |
5729W | Piston ring 83.00 Wiseco | 35.00 |
|
622-2.90 | Needle jet 2.90 | 4.95 |
6065 | O-ring 12.37x2.62 | 1.32 |
|
624-150 | Main jet 150 | 5.50 |
6130 | Clamp 17-25 | 2.53 |
|
624-155 | Main jet 155 | 5.50 |
6144 | Front brake plate cpl | 145.00 |
|
624-160 | Main jet 160 | 5.50 |
6145 | Brake lever front | 57.77 |
|
624-165 | Main jet 165 | 5.50 |
6147 | Brake anchor | 23.15 |
|
624-170 | Main jet 170 | 5.50 |
6148 | Use P/N 1323 | ||
624-175 | Main jet 175 | 5.50 |
6150 | Clutch cable cpl thru 82 | 15.50 |
|
624-180 | Main jet 180 | 5.50 |
6150T | Terrycable clutch 78-82 | 32.95 |
|
624-185 | Main jet 185 | 5.50 |
6151 | Cable holder | 3.85 |
|
624-190 | Main jet 190 | 5.50 |
6152 | Pin | 2.18 |
|
624-195 | Main jet 195 | 5.50 |
6153 | Clip | 0.99 |
|
624-200 | Main jet 200 | 5.95 |
6158 | Bearing bush | .90 |
|
624-205 | Main jet 205 | 5.95 |
6161 | Tank emblem L >79 | 6.05 |
|
624-210 | Main jet 210 | 5.95 |
6162 | Tank emblem R >79 | 6.05 |
|
624-215 | Main jet 215 | 5.95 |
6184 | Piston ring 1st oversize 67.20 | 72.00 |
|
626-35 | Pilot jet 35 | 11.85 |
6184W | Piston ring 67.20 Wiseco | 25.84 |
|
626-40 | Pilot jet 40 | 11.85 |
6187 | Piston ring 2nd oversize 67.40 | 72.00 |
|
626-45 | Pilot jet 45 | 11.85 |
6187W | Piston ring 67.4 Wiseco | 25.84 |
|
626-50 | Pilot jet 50 | 11.85 |
6189 | Piston ring 4th oversize 67.80 | 72.00 |
|
626-55 | Pilot jet 55 | 11.85 |
6189.1W | Piston ring 67.8 Wiseco | 25.84 |
|
626-60 | Pilot jet 60 | 11.85 |
6189W | Piston ring 67.75 Wiseco | 25.84 |
|
626-65 | Pilot jet 65 | 11.85 |
6191 | Piston ring 5th oversize 68.00 | 72.00 |
|
626-70 | Pilot jet 70 | 11.85 |
6191.1W | Piston ring 68.25 Wiseco | 25.84 |
|
626-72 | Pilot jet 72 | 11.85 |
6191.2W | Piston ring 68.5 Wiseco | 25.84 |
|
626-75 | Pilot jet 75 | 11.85 |
6191.3W | Piston ring 69.00 Wiseco | 25.84 |
|
626-78 | Pilot jet 78 | 11.85 |
6191W | Piston ring 68.00 | 25.84 |
|
626-80 | Pilot jet 80 | 11.85 |
6220 | O-ring | 1.54 |
|
631 | Idle screw | 4.75 |
6222 | Fork tube | 178.00 |
|
632 | Spring | 0.77 |
6228 | Foot peg R cpl 79 (NLA) | 39.90 |
|
633 | Float bowl | 32.10 |
6234 | Foor peg L cpl 79 | 39.90 |
|
635 | Seal ring | 0.39 |
6243 | Side panel L 79 | 42.00 |
|
636 | Float bowl gasket | 4.50 |
6247 | Cable guide cpl | 9.46 |
|
637 | Clip | 3.15 |
6252 | Front decal Green | 5.48 |
|
638 | Float | 17.95 |
6253 | Plastic screw M 6x30 | 2.32 |
|
640 | Float pin | 0.98 |
6255 | Lower cable clamp | 5.80 |
|
641 | Slide #1 | 66.50 |
6256 | Clamp plate | 3.96 |
|
642 | Jet needle | 3.98 |
6257 | Cable holder cpl. | 6.96 |
|
643 | Needle clip | 2.65 |
6258 | Cable holder | 2.98 |
|
647 | Screw | 1.14 |
6261 | Front decal Yellow | 5.48 |
|
648 | Adjusting screw | 2.94 |
6265 | Spring nut | 0.88 |
|
649 | Nut | 0.79 |
6275 | Pressure spring | 10.95 |
|
650 | O-ring | 2.30 |
6276 | Exhaust spacer | 5.33 |
|
651 | Rubber boot | 1.10 |
6280 | Throttle cpl | 75.00 |
|
652 | Use P/N 5035 | 6287 | Use P/N 6705 | |||
655 | Ratchet spring | 2.20 |
6303 | Crankcase gasket | 8.40 |
|
656 | Kick klever rubber | 12.53 |
6305 | Securing ring 52x2 | 2.98 |
|
659 | O Ring 15x1.5 | 1.05 |
6316 | Kick lever upper 125 | 44.60 |
|
666 | Kickstarter return spring | 22.20 |
6323 | Brake plate only | 77.50 |
|
668 | Kick joint | 32.30 |
6351-6D6 | Jet needle | 6.96 |
|
673 | Friction disc BC | 15.57 |
6351-8G2 | Needle jet 8G2 | 5.04 |
|
676 | Inner disc BC | 11.00 |
6424 | Valve seat | 4.72 |
|
677 | Terminal disc BC | 18.45 |
6426 | Valve seat | 4.72 |
|
681 | Alum spacer tube | 21.50 |
6427 | Damper insert | 23.07 |
|
682 | Use P/N 3143 | 6428 | Spring ring D38 | 1.10 |
||
683 | Clamp 40-60 | 4.76 |
6429 | Fork cap cpl | 29.05 |
|
692 | Wrist pin Bearing 501 | 33.90 |
6431 | Fork cap | 15.80 |
|
693 | LS crankshaft bearing 3305 C3+B301 | 76.95 |
6436 | Guide bush | 25.50 |
|
695 | Clutch Nut BC | 15.84 |
6437 | Circlip SB46 | 7.69 |
|
696 | Cyl sleeve 501 | 149.95 |
6439 | Fork Seal 42 mm | 10.60 |
|
698 | Cyl base gasket 501 | 4.40 |
6440 | Spring ring 55x1.5 | 4.39 |
|
6441 | Wiper Fork 80-92 | 38.95 |
||||
699 | Head gasket 501 | 17.60 |
6442 | Damper tube | 44.09 |
|
707 | Gasket 4 spd clutch cover | 7.05 |
6447 | Damper piston | 19.65 |
|
712 | Crank pin shim | 5.08 |
6448 | SHim 23.9x28.2x0.9 | 1.10 |
|
713 | Spacer, crank sprocket | 14.42 |
6449 | Retaining ring SW 24 | 0.77 |
|
714 | Crankshaft sprocket | 79.90 |
6450 | Piston ring | 14.20 |
|
717 | 400 Cyl sleeve Sq. Bl. | 99.76 |
6452 | Stop spring soft | 3.96 |
|
720 | 400 Cylinder head gasket | 12.65 |
6454 | Valve | 5.85 |
|
721 | Cylinder base gasket | 7.48 |
6456 | Washer 29.9x36.7x0.2 | 1.33 |
|
724 | Clutch guide BC | 70.15 |
6457 | Circlip 37x1.5 | 1.56 |
|
725 | Clutch push pin | 41.59 |
6458 | Damper tube bush | 11.40 |
|
726 | Clutch housing BC | 199.95 |
6459 | Seal ring 10x15 | 0.47 |
|
729 | Kickstarter ratcher | 91.74 |
6460 | Stop spring hard | 3.96 |
|
730 | Kickstarter pinion | 118.90 |
6463 | Plug | 23.05 |
|
731 | Ratchet spring | 1.76 |
6464 | O-ring 29.74x3.53 | 2.20 |
|
732 | Spring cup | 2.64 |
6471 | Steering stem | 66.10 |
|
733 | Spring clip | 1.76 |
6473 | Upper cross head | 101.10 |
|
734 | Main Shaft 14T K | 144.00 |
6474 | Steering head nut | 17.13 |
|
735 | Chain triplex primary 54L | 76.90 |
6475 | Screw plug | 7.26 |
|
736 | Needle Bearing | 16.09 |
6476 | Shim B 23 | 1.43 |
|
738 | 2nd Gear MS 14T K | 61.05 |
6477 | Lower handle bar clamp cpl | 19.80 |
|
739 | Main shaft 17T U | 88.40 |
6478 | Upper hander bar clamp | 10.50 |
|
740 | 2nd Gear MS 20T U | 61.05 |
6479 | Lower handle bar clamp | 16.75 |
|
741 | Layshaft 13T U1 | 130.80 |
6480 | Cover plate | 15.00 |
|
743 | 3rd Gear LS 16T U1 | 55.88 |
6493 | Use P/N 99044 | ||
743 | Layshaft 13T U | 130.80 |
6496 | Use P/N 99043 | ||
746 | 3rd Gear MS 22T U | 80.52 |
6498 | Handle bar low | 39.65 |
|
747 | 1st Gear LS 20T U | 77.60 |
6501 | Brake rod | 22.30 |
|
749 | Spacer ring | 5.85 |
6502 | Brake lever-rear 80 | 40.80 |
|
750 | Needle Bearing | 10.22 |
6505 | Space bush | 5.08 |
|
751 | Shift shaft BC | 66.40 |
6507 | Use P/N 6508 | ||
753 | Pull Rod | 16.40 |
6508 | Gas tank MC | 310.00 |
|
757 | Kickstarter shaft w/ gear | 131.40 |
6509 | Pet cock | 29.88 |
|
758 | Kickstarter shaft only BC | 117.15 |
6509 | Pet Cock 81 Up | 29.00 |
|
758A | Kickstarter shaft-threaded M18x2.5 | 116.15 |
6510 | O-ring 12x2 | 0.66 |
|
761 | Quardrant gear | 161.70 |
6511 | Loop for tank holder | 8.25 |
|
762 | 2nd Gear LS 18T U1 | 79.80 |
6512 | Use set 99089 | ||
784 | 3rd Gear MS 21T K | 101.80 |
6513 | Use set 99089 | ||
785 | 1st Gear LS 23T K | 127.90 |
6515 | Gas cap w/gasket | 28.58 |
|
786 | 2nd Gear LS 19T K | 86.65 |
6516 | Gas cap seal | 9.45 |
|
848 | Rubber foot rest | 7.90 |
6517 | Breather tube | 3.74 |
|
857 | Key lock | 25.70 |
6520 | Use P/N 5193 | ||
861 | Shim .15mm | 0.88 |
6525 | Seat cpl 80 | 110.00 |
|
862 | Shim .20mm | 0.88 |
6526 | Use P/N 5194 | ||
883 | Spacer bush | 4.10 |
6527 | Seat cover 77-80 | 60.90 |
|
888 | Clutch cover 125 | 72.40 |
6530 | Front brake cable 80-84 | 13.20 |
|
889 | Clutch cover gasket 125 | 3.69 |
6530T | Terrycable front brake cable | 32.95 |
|
892 | Needle Bearing | 15.66 |
6531 | Rubber tank buffer | 14.74 |
|
893 | Crankcase gasket 125 | 4.84 |
6532 | Decal MC 250 1980 | 4.40 |
|
895 | Oil drain plug cpl | 18.40 |
6533 | Foot peg L 1980 | 50.50 |
|
896 | Packing cord 24" | 4.08 |
6535 | Foot peg R 1980 | 19.00 |
|
897 | Oil filler plug 125 | 15.90 |
6536 | Foot peg axle 19 80 | 4.40 |
|
905 | Needle bearing K 16x21x10 FV | 11.00 |
6537 | Foot peg spring R | 10.36 |
|
906 | Bearing L20 | 13.66 |
6538 | Foot peg spring L | 10.36 |
|
909 | Seal 28x38x7 | 10.15 |
6539 | Circlip 10mm | 1.78 |
|
911 | Idler gear | 46.35 |
6540 | Air filter wire 80-81 | 31.87 |
|
913 | Needle bearing 16x21x10 | 23.40 |
6545 | Air filter foam 80-81 | 29.40 |
|
914 | Use P/N 3893 | 6546 | Air box 1980 | 130.00 |
||
919 | Rotary valve | 33.00 |
6547 | Screw M 4.2x16 | 0.33 |
|
920 | Lock washer | 11.52 |
6553 | Air filter tab | 3.85 |
|
932 | Use P/N 1109 | 6555 | Front No. panel | 27.85 |
||
933 | Use P/N 1110 | 6561 | Side panel L 1980 | 52.29 |
||
937 | Pressure plate guide | 6.16 |
6563 | Side panel R 1980 | 52.29 |
|
938 | Sprocket | 49.55 |
6565 | Rubber plug | 3.38 |
|
945 | Clutch pressure plate | 19.80 |
6585 | Gear change lever cpl | 70.30 |
|
946 | Push pin | 10.68 |
6590 | Shift lever rubber | 3.14 |
|
975 | Sprocket 14T | 46.90 |
6591 | Shift shaft | 74.47 |
|
976 | Sleeve pinion nut | 6.42 |
6598 | Cylinder head stay right | 16.00 |
|
977 | Ball bearing 6302 | 18.31 |
6601 | Decal MC400 1980 | 4.40 |
|
978 | Bearing | 18.15 |
6623 | Decal MC400 1980 | 4.40 |
|
979 | Bearing 20x42x8 | 26.20 |
6626 | Fork slider with bush | 197.40 |
|
991 | Sprocket 17T | 48.10 |
6628 | Spacer bush | 10.85 |
|
994 | Hair pin spring | 1.64 |
6629 | Fork spring | 49.00 |
|
1000 | O-ring 9.5x2.5 | 1.37 |
6630 | Fork slider only | 197.95 |
|
1004 | Kickstarter lever | 50.21 |
6631 | Fork slider cpl | 205.40 |
|
1013 | Kickstarter return spring | 6.60 |
6632 | Damper tube | 73.24 |
|
1016 | Snap ring for cover | 1.18 |
6637 | Fork tube | 263.53 |
|
1017 | O-ring 16x24x4 | 2.40 |
6640 | Lower cross head | 139.60 |
|
1019 | Circlip | 0.44 |
6642 | Washer D 10.5 | 0.44 |
|
1020 | O-ring 14x17x1.5 | 1.81 |
6659 | Silent block | 6.60 |
|
1023 | Air boot 125 | 50.48 |
6660 | Head stay left 490 | 13.91 |
|
1031 | Sliding piece | 19.80 |
6661 | Head stay right 490 | 13.91 |
|
1032 | Rubber plate | 12.34 |
6668 | Handle bar | 70.30 |
|
1035 | Use P/N 5395 | 6669 | Rear fender 81-84 | 52.00 |
||
1084 | Needle bearing 15x28x2 | 12.02 |
6670 | Front hub only | 208.90 |
|
1096 | Spacer | 3.96 |
6674 | Front spoke 4x227- 80 Deg. | 3.18 |
|
1097 | 125 Piston ring 54.00 | 33.00 |
6675 | Front spoke 4x227-100 Deg. | 3.18 |
|
1109 | Head gasket 125 | 7.05 |
6676 | Front spoke 4x244-115 Deg. | 3.18 |
|
1110 | 125 Cyl base gasket | 4.12 |
6687 | Use P/N 7398 | ||
1112 | Exhaust gasket | 2.72 |
6688 | Use P/N 7397 | ||
1121 | Rubber ring | 3.69 |
6689 | Rear hub only 81,83-84 | 282.00 |
|
1123 | Nut for generator | 7700 |
6696 | Spacer-sprocket bolt | 6.26 |
|
1124 | Ignition coil | 47.80 |
6702 | Bush for brake lever | 6.26 |
|
1126 | Plug cap | 14.95 |
6703 | Rear brake rod | 31.00 |
|
1129 | Carb rubber | 11.40 |
6705 | Chain adjuster | 20.60 |
|
1135 | Sprocket 15T | 35.05 |
6709 | Use P/N 3188 | ||
1136 | Sprocket 16T | 42.06 |
6711 | Rear brake plate cpl | 160.80 |
|
1138 | Isolation plate | 15.79 |
6713 | Use P/N 6508 | ||
1139 | Sealing ring | 3.84 |
6714 | Tank decal left 1981 | 8.25 |
|
1147 | Piston ring 54.50 | 37.62 |
6715 | Tank decal right 1981 | 8.25 |
|
1166 | Rubber mount | 19.15 |
6720 | Seat base | 68.00 |
|
1249 | Silent block | 13.75 |
6721 | Seat bracket | 28.80 |
|
1263 | Gas cap seal | 2.98 |
6722 | Holding loop | 17.60 |
|
1313 | Crank stuffer O-ring | 3.53 |
6723 | Seat cpl low 81-82 | 121.00 |
|
1322 | Front brake shoes EBC (PR) | 27.50 |
6724 | Seat foam (low) 81-82 | 109.00 |
|
1323 | Tension spring | 10.95 |
6725 | Seat cover 81-82 | 59.90 |
|
1324 | Front brake lever | 26.40 |
6729 | Hook | 3.52 |
|
1404 | Use P/N 1514 | 6730 | Side panel decal R | 5.50 |
||
1406 | Countersunk screw M6x10 | 0.44 |
6731 | Foot peg left | 37.95 |
|
1416 | Countersunk rivet 6x22 | 0.97 |
6735 | Foot peg right | 36.10 |
|
1420 | Countersunk rivet 6x30 | 0.97 |
6738 | Foot peg bush | 10.00 |
|
1421 | Washer 12x18x1 | 0.52 |
6739 | Foot rest spring left | 6.16 |
|
1424 | Crankcase gasket 125 | 4.40 |
6740 | Foot peg spring right | 6.16 |
|
1427 | Securing spring A 16x1 | 0.58 |
6741 | Head stay L 250 | 12.80 |
|
1438 | Securing ring A 12x1 | 0.35 |
6742 | Head stay R 250 | 12.80 |
|
1439 | Cylinder screw M 6x10 | 0.61 |
6743 | Air box Red 1981 | 99.00 |
|
1447 | Washer 9x15x1 | 1.66 |
6746 | Use P/N 99033 (PR) | ||
1465 | Stud M 5x4 | 0.53 |
6749 | Use P/N 99033 (PR) | ||
1479 | Bearing 17x35x8 | 30.90 |
6750 | Spacer 8.5x12x12 | 4.40 |
|
1480 | Seal ring 17x85x5 | 11.88 |
6752 | Side panel decal L | 5.50 |
|
1498 | Screw M5.5x18 | 0.97 |
6753 | Intake tube 490 | 47.50 |
|
1500 | Hexagon screw M 6x40 | 0.55 |
6785 | Kick pinion 1982 | 116.50 |
|
1508 | Stud M 6x20 | 0.88 |
6786 | Spring cup | 7.08 |
|
1509 | Spring ring | 9.03 |
6788 | Cylinder 250 cpl 81-82 | 578.90 |
|
1510 | Spring ring B 6 | 0.44 |
6789 | Cylinder sleeve 250 81-82 | 241.50 |
|
1511 | Spring ring B 8 | 0.48 |
6791 | Cylinder head 250 81-82 | 181.00 |
|
1512 | Spring ring B 10 | 0.44 |
6792 | Cylinder head gasket 250 81-83 | 21.71 |
|
1513 | Counter sunk screw M 5x16 D 963 | 0.53 |
6793 | Cylinder base gasket 0.3 thick | 13.91 |
|
1514 | Countersunk screw M 6x10 | 0.53 |
6794 | Cylinder head gasket 0.5 thick | 8.40 |
|
1515 | Use P/N 1597 | 6795 | Cylinder head gasket 0.7 thick | 11.00 |
||
1517 | Socket screw M8x75 | 1.76 |
6796 | Reed valve cpl | 142.44 |
|
1519 | Cylinder screw 6x75 | 1.67 |
6797 | Reed valve body | 118.85 |
|
1521 | Use P/N 1595 | 6798 | Reed valve pedal | 9.90 |
||
1523 | Exhaust bolt M6x70 | 1.27 |
6799 | Reed valve stop | 17.95 |
|
1525 | Hexagon screw M 6x14 | 0.88 |
6800 | Clutch housing 250 | 269.90 |
|
1526 | Cylinder head screw M 8x10 | 0.99 |
6803 | Primary chain single row | 43.60 |
|
1527 | Cylinder head screw M 4x10 | 0.27 |
6806 | Handle bar bushing | 6.93 |
|
1528 | Cylinder head screw M 4x16 | 0.53 |
6810 | Intake reed gakset | 4.40 |
|
1529 | Cylinder head screw M 5x10 | 0.53 |
6813 | Use P/N 6813W | ||
1533 | Cylinder head screw M 6x18 | 0.60 |
6813W | Piston 86.42 Wiseco | 218.00 |
|
1536 | Cylinder head screw M 6x25 | 0.53 |
6814 | Piston ring Std. 86.5 | 74.95 |
|
1537 | Cylinder head screw M 6x28 | 0.62 |
6814W | Piston ring 86.50 Wiseco | 20.00 |
|
1538 | Cylinder head screw M 6x35 | 0.66 |
6815 | Piston 1st oversize 86.64 | 231.31 |
|
1539 | Cylinder head screw M 6x40 | 0.73 |
6816 | Piston 2nd oversize 86.84 | 231.31 |
|
1541 | Cylinder head screw M 6x50 | 0.79 |
6817 | Use P/N 6819W | ||
1542 | Cylinder head screw M 6x55 | 0.88 |
6817W | Piston 86.92 Wiseco | 231.31 |
|
1543 | Cylinder head screw M6x60 | 1.10 |
6818 | Piston 4th oversize 87.24 | 231.31 |
|
1544 | Cylinder head screw M6x65 | 0.97 |
6819 | Piston 5th oversize 87.44 | 231.31 |
|
1545 | Cylinder head screw M 6x80 | 1.43 |
6819.1W | Piston 87.92 Wiseco | 231.31 |
|
1546 | Cylinder head screw M 6x85 | 1.76 |
6819.2W | Piston 88.42 Wiseco | 231.31 |
|
1547 | Cylinder Head Screw M6x90 | 1.98 |
6819W | Piston 87.42 Wiseco | 231.31 |
|
1550 | Cylinder head screw M 6x30 | 0.66 |
6820 | Piston ring 1st oversize 86.7 | 86.59 |
1567 | Hexagon screw M 6x70 | 1.24 |
6821 | Piston ring 2nd oversize 86.90 | 86.59 |
|
1564 | Hexagon screw M6x10 | 0.49 |
6822 | Piston ring 3rd oversize 87.10 | 86.59 |
|
1565 | Hexagon screw M6x12 | 0.53 |
6822W | Piston ring 87.00 Wiseco | 20.85 |
|
1567 | Hexagon screw M6x16 | 0.44 |
6824 | Piston ring 5th oversize 87.50 | 86.59 |
|
1568 | Hexagon screw M 6x18 | 0.62 |
6824.1W | Piston ring 88.33 Wiseco | 20.85 |
|
1569 | Hexagon screw M 6x20 | 0.51 |
6824.2W | Piston ring 88.50 Wiseco | 20.85 |
|
1570 | Hexagon screw M 6x25 | 0.55 |
6824.3W | Piston ring 89.00 Wiseco | 20.85 |
|
1571 | Hexagon screw M 6x30 | 0.53 |
6824W | Piston ring 87.50 Wiseco | 20.85 |
|
1572 | Hexagon screw M 6x35 | 0.66 |
6826 | Crankshaft sprocket 250 | 62.70 |
|
1573 | Hexagon screw M 6x50 | 0.97 |
6827 | Crankshaft sprocket 490 | 62.70 |
|
1574 | Hexagon screw M 6x54 | 0.97 |
6828 | Fork wiper 42mm | 25.50 |
|
1575 | Hexagon screw M 6x60 | 1.10 |
6844 | Exhaust pipe 400/490 | 430.00 |
|
1579 | Hexagon screw M 6x80 | 1.23 |
6851 | Exhaust packing | 24.35 |
|
1580 | Hexagon screw M 6x45 | 0.66 |
6866 | Exhaust spring | 5.97 |
|
1584 | Hexagon screw M 7x20 | 0.66 |
6893 | Exhaust flange cpl 490 | 58.80 |
|
1585 | Hexagon screw M 8x10 | 0.66 |
6904 | Carburetor cpl Bing 490 | 232.40 |
|
1587 | Hexagon screw M 8x16 | 0.66 |
6905 | Carburetor cpl Bing 250 | 238.40 |
|
1589 | Hexagon screw M 8x20 | 0.80 |
6906 | Vaporizer No. 7 | 8.91 |
|
1591 | Hexagon screw M 8x25 | 0.75 |
6908 | Choke piston | 14.00 |
|
1592 | Hexagon screw M 8x30 | 0.75 |
6909 | Spring 60-179 | 2.20 |
|
1593 | Hexagon screw M 8x35 | 0.84 |
6910 | Choke housing | 6.71 |
|
1594 | Hexagon screw M 8x40 | 0.75 |
6911 | Rubber cap 80-725 | 2.90 |
|
1595 | Hexagon screw M 8x45 | 0.80 |
6912 | Choke lever 58-985 | 15.66 |
|
1596 | Hexagon screw M 8x50 | 0.84 |
6913 | Screw 40-566 | 0.88 |
|
1597 | Hexagon screw M 8x55 | 0.84 |
6914 | Nut 42-502 | 0.44 |
|
1598 | Hexagon screw M 8x60 | 0.97 |
6915 | Floater cap | 32.68 |
|
1599 | Hexagon screw M 8x60 | 0.75 |
6918 | Piston std. 66.95 Wiseco | 184.85 |
|
1600 | Hexagon screw M 8x65 | 1.14 |
6918W | Piston 66.95 Wiseco | 184.85 |
|
1601 | Hexagon screw M 8x70 | 1.23 |
6919 | Use P/N 523 | ||
1604 | Hexagon screw M 8x90 | 0.99 |
6920 | Use P/N 6920W | ||
1610 | Engine mount bolt M8x120 | 5.54 |
6920W | Piston 67.20 Wiseco | 184.85 |
|
1618 | Hexagon screw M 10x50 | 4.24 |
6921 | Use P/N 6922W | ||
1619 | Hexagon screw M 10x55 | 1.32 |
6922 | Piston 4th oversize 67.55 | 219.00 |
|
1626 | Hexagon screw M 10x1.5x60 | 1.10 |
6922W | Piston 67.45 Wiseco | 184.85 |
|
1628 | Socket screw M 8x25 | 1.32 |
6923 | Piston 67.75 Wiseco | 184.85 |
|
1629 | Use P/N 1646 | 6923W | Piston 67.70 Wiseco | 184.85 |
||
1630 | Socket screw M 5x16 | 0.46 |
6924 | Use P/N 6184 | ||
1631 | Socket screw M 5x16 | 0.44 |
6925 | Use P/N 6187 | ||
1633 | Socket screw M 5x16 | 0.53 |
6929 | Piston ring 5th oversize 67.95 | 217.00 |
|
1635 | Socket screw M 6x25 | 0.44 |
6929.1W | Piston 68.20 Wiseco | 184.85 |
|
1638 | Socket screw M 6x50 | 1.23 |
6929.2W | Piston 68.45 Wiseco | 184.85 |
|
1646 | Socket screw M 8x30 | 0.66 |
6929.3W | Piston 68.95 Wiseco | 184.85 |
|
1647 | Socket screw M 8x35 | 0.71 |
6929W | Piston 67.95 Wiseco | 184.85 |
|
1648 | Socket screw M 8x40 | 0.97 |
6932 | Oval head screw M 3x10 | 0.46 |
|
1649 | Socket screw M 8x45 | 1.59 |
6938 | Cylinder cpl 490 | 356.00 |
|
1650 | Socket screw M 8x12 | 1.06 |
6940 | Cylinder sleeve 490 | 188.90 |
|
1652 | Socket screw M 8x20 | 0.66 |
6941 | Cylinder head 490 | 195.90 |
|
1655 | Socket screw M 10x25 | 1.100 |
6942 | Cylinder head gasket 81-82 490 | 26.60 |
|
1657 | Socket screw M 10x40 | 1.65 |
6991 | O-ring 30x4 | 2.20 |
|
1661 | Socket screw M 10x50 | 2.73 |
7303 | Chain protector | 40.00 |
|
1665 | Hexagon nut M 4 | 0.24 |
7340 | Fender rear Enduro | 131.00 |
|
1666 | Hexagon nut M 5 | 0.24 |
7397 | Rear spoke short 4.5x4x163 81-85 | 4.26 |
|
1667 | Hexagon nut M 6 | 0.18 |
7398 | Rear spoke long 4.5x4x209 81-85 | 3.99 |
|
1670 | Hexagon screw M 8 | 0.26 |
7400 | Frame cpl 1982 | 276.00 |
|
1674 | Hexagon nut M 10x1.5 | 0.66 |
7413 | Swing arm 1982 | 271.10 |
|
1675 | Hexagon nut M 10x1.25 | 0.66 |
7422 | Joint fork cpl | 83.50 |
|
1676 | Hexagon nut M 10 flat | 0.88 |
7423 | Fork joint | 74.50 |
|
1677 | Hexagon nut M 10x1.0 | 0.71 |
7424 | Linkage bushing 16x18x15 | 8.30 |
|
1683 | Hexagon nut M 16x1.5 | 2.20 |
7425 | Use P/N 7426 | ||
1689 | Locknut M 5 | 0.26 |
7426 | Linkage arm 1982 | 80.10 |
|
1690 | Locknut M 6 | 0.33 |
7427 | Spherical bearing | 80.80 |
|
1691 | Locknut M 7 | 0.77 |
7428 | Distance bush 11x16x56 | 7.10 |
|
1692 | Locknut M 8 | 0.46 |
7429 | Support loop | 9.35 |
|
1693 | Locknut M 10x1.5 | 0.79 |
7430 | Screw socket 19 | 20.62 |
|
1694 | Securing nut M 10x1.0 | 0.97 |
7431 | Joint bolt | 17.96 |
|
1698 | Flange nut M 8 | 0.66 |
7432 | Distance bushing 12x16x36 | 7.69 |
|
1700 | Securing nut M 8 | 0.88 |
7433 | Air filter cover plate | 6.71 |
|
1702 | Lock nut M 4 | 0.10 |
7435 | Air filter frame | 44.00 |
|
1704 | Lock nut M 6 | 0.11 |
7436 | Air filter 82-on | 23.40 |
|
1705 | Lock nut M 8 | 0.13 |
7437 | Filter holding wire | 25.00 |
|
1706 | Lock nut M 10x1.25 Din 98 | 0.18 |
7438 | Air filter box 1982 | 114.50 |
|
1709 | Hexagon nut NM 16x1.5 | 7.04 |
7442 | Clamp | 2.62 |
|
1711 | Spring washer M 5 | 0.07 |
7446 | Side panel, left 1982 | 40.10 |
|
1712 | Spring washer M 6 | 0.11 |
7450 | Side panel right 1982 | 40.10 |
|
1713 | Spring washer M 7 | 0.13 |
7451 | Use P/N 348 | ||
1714 | Spring washer M 8 | 0.18 |
7461 | Cylinder head gasket 490 83-84 | 20.90 |
|
1715 | Spring washer M 10 | 0.29 |
7462 | Cylinder base gasket 0.3 | 12.40 |
|
1718 | Spring washer M 14 | 0.40 |
7463 | Cylinder base gasket 0.5 | 7.80 |
|
1719 | Securing nut M 4 | 0.53 |
7464 | Cylinder base gasket 0.7 | 9.40 |
|
1726 | Washer A 6.4 | 0.26 |
7465 | Intake elbow 490 ALUM | 60.70 |
|
1727 | Securing nut M 12x1.5 | 1.23 |
7466 | Intake flange 1983 Enduro ALUM | 80.56 |
|
1728 | Flat washer D 3.2 | 0.07 |
7467 | Intake flange 490 rubber | 83.10 |
|
1731 | Flat washer D 5.3 | 0.11 |
7470 | Intake flange 250 ALUM | 59.60 |
|
1732 | Flat washer D 6.4 | 0.22 |
7472 | Front fork cpl | 1108.00 |
|
1734 | Flat washer D 8.4 | 0.11 |
7474 | Tripple clamp upper | 138.15 |
|
1735 | Flat washer D 10.5 | 0.18 |
7475 | Damper tube soldered | 39.55 |
|
1737 | Flat washer D 13 | 0.22 |
7477 | Damper tube cpl | 49.66 |
|
1741 | Washer A 5.3 | 0.44 |
7478 | Damper cpl | 91.06 |
|
1742 | Washer B 4.3 | 0.26 |
7479 | Rebound spring hard | 4.90 |
|
1745 | Washer B 8.2x20 | 0.53 |
7480 | Fork leg cpl | 411.10 |
|
1747 | Washer 8.4x15x1.5 | 0.53 |
7481 | Fork spring | 43.65 |
|
1749 | Washer 8.4x25x2 | 1.65 |
7483 | Use P/N 10100 | ||
1750 | Washer M 6x20 | 0.33 |
7484 | Steering stem clip | 1.10 |
|
1753 | Washer 12.2x30.2x0.5 | 0.97 |
7486 | Crankcase right | 376.20 |
|
1754 | Washer 15x25x2 | 0.44 |
7488 | Crankcase left | 347.00 |
|
1758 | Washer 25x10x2 | 0.44 |
7489 | Use P/N 1993 | ||
1759 | Washer B 8.4 | 0.62 |
7490 | Plug | 0.66 |
|
1762 | Pan head screw M 5x10 | 0.26 |
7500 | Rear hub 1982 | 217.10 |
|
1768 | Stud M 6x42 | 1.38 |
7502 | Brake cam | 40.90 |
|
1772 | Stud M 8x25 | 1.10 |
7504 | Brake plate R bare 1982 | 125.50 |
|
1774 | Stud M 8x40 | 2.31 |
7505 | Pivot bolt | 11.40 |
|
1780 | Stud M 10x50 | 1.49 |
7506 | Sliding bush | 14.00 |
|
1782 | Stud M 10x45 | 1.76 |
7507 | Brake plate cpl R 1982 | 145.00 |
|
1783 | Use P/N 8576 | 7508 | Bearing bush | 15.00 |
||
1784 | Stud M 5x6 | 0.53 |
7409 | Thrust washer | 3.46 |
|
1787 | Stud M 8x28 | 3.85 |
7514 | Sprocket 56T | 72.00 |
|
1788 | Cylinder head screw M 5x6 | 1.65 |
7515 | Nilos ring | 4.40 |
|
1795 | Counter sunk screw M 5x8 | 0.44 |
7516 | Chain adjuster | 17.15 |
|
1803 | Rear sprocket bolt M 8x40 | 1.37 |
7518 | Chain adjuster | 39.80 |
|
1810 | Countersunk screw M 5x20 | 0.66 |
7519 | Rear axle 1982 | 43.30 |
|
1812 | Counter sunk screw M 6x16 | 0.77 |
7521 | Sprocket steel 54T thru 85 | 67.60 |
|
1823 | Counter sunk screw M 6x80 | 1.43 |
7527 | Rear brake arm | 51.15 |
|
1828 | Tension pin 5x26 | 0.53 |
7531 | Foot brake pedal | 47.85 |
|
1831 | Tension pin 6x10 | 0.79 |
7535 | Bearing bush | 5.94 |
|
1836 | Lock ring D 8x0.8 | 0.33 |
7536 | Rear brake rod | 12.75 |
|
1838 | Securing washer | 0.33 |
7537 | Nipple holder | 7.26 |
|
1839 | Lock ring | 0.33 |
7538 | Brake adjust nut 1982 | 4.95 |
|
1840 | Lock ring D 9 | 0.44 |
7539 | Bearing bush | 7.48 |
|
1842 | Circlip 10x1.2 | 0.55 |
7541 | Brake rod | 21.80 |
|
1848 | Sprocket circlip | 1.54 |
7544 | Alpha control decal 1982 | 4.40 |
|
1849 | Retaining ring 32mm | 0.88 |
7545 | Fork bolt | 12.75 |
|
1850 | Circlip D 40x1.75 | 2.20 |
7546 | Shock bolt lower | 9.80 |
|
1853 | Circlip D 35x1 | 1.54 |
7547 | Washer | 6.26 |
|
1857 | Split pin D 3x25 | 0.44 |
7548 | Shim | 1.10 |
|
1863 | Use P/N 3053 | 7549 | Shim | 1.10 |
||
1865 | Seal 12x22x7 | 7.65 |
7550 | Foam seal ring | 2.75 |
|
1866 | Oil seal 18x28x7 | 8.85 |
7555 | Chain guide plate R | 9.90 |
|
1869 | Ball 1/8" | 0.22 |
7556 | Roller chain | 9.35 |
|
1873 | Ball D 6 | 0.33 |
7557 | Chain guide spacer bush | 4.95 |
|
1874 | Ball D 7 | 0.53 |
7558 | Chain guide spacer | 4.62 |
|
1875 | Securing ring 88x3 | 5.54 |
7559 | Sliding washer | 9.35 |
|
1877 | Oval head screw M 3x8 | 0.26 |
7560 | Swing arm pad | 13.00 |
|
1878 | Countersunk screw M 6x16 | 0.53 |
7562 | Bearing piece | 3.74 |
|
1879 | Circlip, sprocket 83-on | 0.88 |
7563 | Plug | 0.88 |
|
1880 | Flat head sprocket bolt M 8x50 | 1.54 |
7589 | Brake plate | 50.80 |
|
1881 | Woodruff key 3x3.7 | 0.77 |
7590 | Use P/N 6508 | ||
1882 | Woodruff key 4.5 | 0.97 |
7599 | Internal motoplat w/o coil | 331.00 |
|
1883 | Woodruff key 4x6.5 | 1.06 |
7618 | Steering head nut | 10.50 |
|
1884 | Securing ring | 5.11 |
7619 | Fork spring | 44.00 |
|
1891 | Oil sealing ring | 2.20 |
7840 | Swing arm 1983 | 325.00 |
|
1897 | Securing ring 32x1.5 | 1.32 |
7841 | Chain adjuster | 15.85 |
|
1900 | Oval head nail D 2x4 | 0.35 |
7845 | Joint fork | 107.95 |
|
1901 | Oval head neil 3x8 | 0.35 |
7846 | Bearing bush | 8.48 |
|
1902 | O-ring 45x2.5 | 1.32 |
7847 | Bushing | 11.75 |
|
1903 | Pin D 8x20 | 1.32 |
7848 | Use P/N 7849 | ||
1906 | Oval head rivet 4x10 | 0.29 |
7849 | Linkage are 83-84 | 69.65 |
|
1915 | Nipple M 6 | 1.32 |
7850 | Grease nipple | 1.76 |
|
1920 | Transmission shim .2 | 0.88 |
7851 | Hinge bush 10x14x22 | 9.79 |
|
1921 | Layshaft shim .15mm | 1.10 |
7852 | Use P/N 8858 | ||
1930 | O-ring 20x4 | 1.67 |
7853 | Seal ring | 4.66 |
|
1931 | Inner bush swing arm >84 | 22.70 |
7854 | Fork bolt | 25.90 |
|
1932 | Guide plate on swing arm | 7.60 |
7855 | Socket screw M 12x70 | 3.96 |
|
1933 | Chain guide RH | 7.60 |
7856 | Hinge bearing bolt | 19.70 |
|
1934 | Chain guide LH | 7.60 |
7857 | Distance bushing 11x16x40 | 8.95 |
|
1935 | Plastic guide | 7.50 |
7858 | Support Loop | 9.35 |
|
1936 | Bush for roller | 7.84 |
7860 | Use P/N 8513 | ||
1937 | Chain roller | 10.45 |
7861 | Swing arm pad | 10.52 |
|
1964 | Decal "M" 4.5" | 8.80 |
7863 | Swing arm plug | 0.88 |
|
1977 | Brake rod | 24.20 |
7864 | Chain guide spacer | 5.50 |
|
1978 | Rear brake arm | 38.23 |
7886 | Sprocket 52T | 69.00 |
|
1983 | Sprocket cover | 30.40 |
7889 | Decompression lever assy. | 14.78 |
|
1984 | Use P/N 408 | 7890 | Screw nipple | 1.67 |
||
1985 | Vent nipple | 8.36 |
7891 | Clutch lever cover | 6.60 |
|
1986 | Bearing lock plate | 9.45 |
7892 | Use P/N 9351 | ||
1987 | Crankshaft housing | 37.60 |
7894 | Use P/N 9352 | ||
1988 | Chain bearing lock plate | 8.80 |
7895 | Use P/N 99044 | ||
1989 | Ignition case gasket | 4.40 |
7896 | Use P/N 6669 | ||
1990 | Clutch gasket | 8.36 |
7898 | Use P/N 8521 | ||
1991 | Ignition cover black | 41.80 |
7901 | Spacer bush for brake plate | 6.28 |
|
1993 | Center case gasket | 7.48 |
7902 | Brake plate cpl | 168.45 |
|
1994 | Engine bush rear | 13.20 |
7903 | Rear axle 83-84 | 40.00 |
|
1995 | Engine bush front | 5.18 |
7907 | Rear wheel spacer 15.0 | 11.20 |
|
1997 | Inner ring | 6.88 |
7910 | Rear brake pedal 83-84 | 38.40 |
|
2001 | Rim band 21" | 4.84 |
7917 | Hexagon screw M 8x100 | 3.30 |
|
2002 | Tube 3.00x21 | 25.70 |
7921 | Use P/N 1598 | ||
2003 | Tire 3.00x21" | 94.05 |
7922 | Brake lever spring | 16.95 |
|
2005 | Rim band 18" | 4.80 |
7924 | Use P/N 6508 | ||
2008 | Tire 4.5x18 | 117.20 |
7927 | Tank decal L 1983 EUROPE | 11.00 |
|
2015 | Tube 4.5x18 | 26.40 |
7928 | Tank decal R 1983 EUROPE | 11.00 |
|
2025 | Mainshaft | 89.35 |
7935 | Cylinder head stay | 22.00 |
|
2037 | Output shaft 28T | 135.90 |
7936 | Rear brake rod | 21.50 |
|
2038 | Plug | 2.97 |
7937 | Blind rivet 3.2x10 | 0.99 |
|
2039 | 5th gear on mainshaft 28T | 59.85 |
7938 | Use P/N 7950T | ||
2043 | Spacer washer | 7.26 |
7939 | Spacer bush | 2.31 |
|
2044 | Spacer ring | 11.90 |
7942 | Seat cpl 1983 | 128.00 |
|
2049 | 5th gear on mainshaft 29T | 65.10 |
7943 | Seat foam-low 1983 | 80.70 |
|
2058 | Piston 67.71 | 175.80 |
7944 | Seat cover Red 1983 | 62.50 |
|
2059 | Piston 1st oversize 67.10 | 193.20 |
7948 | Use P/N 7988 | ||
2060 | Piston 2nd oversize 67.25 | 193.20 |
7949 | Cylinder head stay | 15.40 |
|
2060W | Piston 67.20 Wiseco | 184.35 |
7950 | Clutch cable cpl thru 82 | 23.53 |
|
2061 | Piston 3rd oversize 67.40 | 193.20 |
7950T | Terrycable clutch cable 1983-on | 32.95 |
|
2062W | Piston 67.45 Wiseco | 184.35 |
7951 | Clutch cable nipple | 3.95 |
|
2063 | Use P/N 2465 | 7954 | Throttle cable 1983-on | 16.33 |
||
2064 | Piston ring 1st oversize 67.15 | 73.27 |
7954T | Terrycable throttle cable 1983-on | 32.95 |
|
2065 | Piston ring 2nd oversize 67.30 | 45.70 |
7957 | Spoke 4x3.5x4x230-80º | 3.63 |
|
2065W | Piston 67.25 Wiseco | 22.76 |
7958 | Spoke 4x3.5x4x230-100º | 3.63 |
|
2066 | Piston ring 3rd oversize 67.45 | 73.27 |
7968 | Clamp | 10.22 |
|
2066W | Piston Ring 67.5 Wiseco | 25.24 |
7969 | Air box 83-84 | 169.00 |
|
2067 | Piston ring 3rd oversize 67.60 | 65.10 |
7971 | Side panel L. 1983 | 65.00 |
|
2067W | Piston ring 67.60 Wiseco | 22.04 |
7972 | Side panel R. 1983 | 65.00 |
|
2069 | Piston 1st oversize 77.09 | 201.20 |
7973 | Intake air boot | 43.95 |
|
2070 | Piston 2nd oversize 77.23 | 201.20 |
7975 | Front No. plate decal Green 83-86 | 3.95 |
|
2071 | Piston 3rd oversize 77.40 | 201.20 |
7977 | Decal L green | 3.95 |
|
2072 | Piston 4th oversize 77.53 | 297.00 |
7978 | Decal LS panel 1983 | 4.40 |
|
2072W | Piston 77.50 Wiseco | 190.30 |
7980 | Decal R Green | 3.95 |
|
2076 | Piston ring 1st oversize 77.15 | 4805 |
7981 | Decal RS panel 1983 | 4.40 |
|
2078 | Piston ring 3rd oversize 77.45 | 48.05 |
7983 | Front decal Yellow 1983 | 6.60 |
|
2079 | Piston ring 4th oversize 77.60 | 48.05 |
7988 | Spash guard rear | 23.00 |
|
2101 | Piston Ring 76.95 | 48.05 |
7990 | Chain roller cpl | 38.50 |
|
2110 | Piston std. 81.92 wiseco | 208.00 |
7991 | Chain roller cpl | 20.30 |
|
2111 | Piston Ring 82.00 | 70.20 |
7992 | Spacer bush | 3.60 |
|
2111W | Piston ring 82.00 Wiseco | 35.20 |
7993 | Ball bearing 608 2 RS | 11.02 |
|
2112 | Use P/N 2473 | 7994 | Loop | 7.48 |
||
2113 | Piston ring 1st oversize 82.15 | 51.45 |
7996 | Use P/N 1749 | ||
2114 | Use P/N 2474 | 8008 | Bearing lock plate | 4.40 |
||
2115 | Piston ring 2nd oversize 82.30 | 88.70 |
8009 | Thrust plate | 4.30 |
|
2116 | Use P/N 2474 or 2118 | 8010 | Lock plate | 1.36 |
||
2117 | Piston ring 3rd oversize 82.45 | 88.70 |
8011 | Chain guard plate | 22.34 |
|
2118 | Piston 4th oversize 82.52 | 207.00 |
8012 | Spacer bush | 3.54 |
|
2118W | Piston 82.42 Wiseco | 218.00 |
8014 | Return spring pin | 7.18 |
|
2119 | Piston ring 4th oversize 82.60 | 87.80 |
8016 | Stop plate | 5.72 |
|
2119W | Piston ring 82.50 Wiseco | 35.00 |
8018 | Crankcase R 250 | 286.00 |
|
2120 | Use P/N 2476 or 2477 | 8020 | Crankcase L 250 | 324.00 |
||
2121 | Piston ring 82.9 | 87.80 |
8021 | Crankcase gasket | 8.36 |
|
2133 | Sliding piece, plastic | 24.04 |
8023 | Clutch case gasket | 8.36 |
|
2140 | Clutch cover | 149.00 |
8024 | Clutch cover 250/490 | 208.90 |
|
2146 | Chain protector GS | 34.85 |
8025 | Oil plate | 5.72 |
|
2148 | Grip R Magura | 9.47 |
8026 | Crankcase L 490 | 413.50 |
|
2156 | Cylinder head 250 | 138.37 |
8027 | Crankcase R 490 | 363.45 |
|
2157 | 400 cyllinder 78-80 | 456.50 |
8029 | Crankcase left | 355.50 |
|
2159 | Cylinder sleeve 400 78-81 | 198.25 |
8030 | Crankcase gasket | 8.36 |
|
2160 | Cylinder head Radial | 198.00 |
8031 | Oil plate | 5.28 |
|
2169 | Lock ring | 2.53 |
8032 | Swing arm bush | 10.92 |
|
2171 | 78-79 Magnum fork seal | 11.35 |
8049 | Crankshaft gear 24T | 115.13 |
|
2172 | Seal ring M 40 | 1.32 |
8057 | Crankshaft seal 250 | 13.02 |
|
2184 | Air valve cpl | 7.15 |
8067 | Needle bearing 25x31x20 | 34.95 |
|
2186 | Valve core | 3.87 |
8070 | Crankshaft gear 31T | 83.75 |
|
2187 | Air valve cap | 3.87 |
8071 | Clutch spring 490 | 5.50 |
|
2204 | Lever cover red | 8.25 |
8072 | Washer 18x25x0.5 | 0.67 |
|
2211 | Throttle stop adjusting screw | 3.78 |
8077 | Cover plate | 18.90 |
|
2212 | Rubber cap | 5.72 |
8079 | Needle cage | 13.00 |
|
2213 | Clutch lever bracket | 16.50 |
8082 | Fiber clutch plate | 19.30 |
|
2215 | Use P/N 8522 | 8083 | Use P/N 9450 | |||
2216 | Clutch lever blade-magura | 30.85 |
8084 | Pressure plate | 81.50 |
|
2217 | Brake lever bracket | 35.41 |
8087 | Clutch bearing | 35.90 |
|
2218 | Use P/N 8523 | 8089 | Clutch push rod | 9.65 |
||
2219 | Brake lever blade-magura | 24.75 |
8091 | Needle roller | 0.88 |
|
2220 | Kill button cpl | 18.70 |
8092 | Clutch nut lock tab | 4.75 |
|
2221 | Rubber cap | 3.74 |
8094 | Clutch gear 66T 490 | 193.86 |
|
2228 | Gas cap | 24.25 |
8096 | Clutch housing only 490 | 181.60 |
|
2228V | Gas cap W vent tube | 26.64 |
8100 | Clutch body | 62.50 |
|
2233 | Hub-front | 157.85 |
8101 | Clutch housing cpl 490 | 252.00 |
|
2236 | Front brake plate | 63.25 |
8102 | Rubber cushion | 4.96 |
|
2237 | Cylinder head gasket 0.7 thick | 8.25 |
8105 | Clutch spring bolt | 9.60 |
|
2238 | Brake plate bush | 5.94 |
8106 | Clutch spring 250 | 3.44 |
|
2242 | Spoke nipple M 4.0 | 1.65 |
8121 | Bearing op shaft 3205 2 RS C 3 2 | 52.02 |
|
2247 | Front axle cpl | 49.95 |
8126 | Ball bearing mainshaft 6204 ZC 3 | 14.00 |
|
2250 | Spacer bush | 9.36 |
8144 | Mainshaft 14T D | 139.33 |
|
2264 | Side panel 78 L-falk | 41.36 |
8145 | 2nd gear MS 17T D | 130.44 |
|
2271 | Side panel 78 R-falk | 41.36 |
8146 | 3rd gear MS 20T D | 139.33 |
|
2275 | Isolation hose 8x0.7 | 2.53 |
8147 | 4th gear MS 23T CD | 131.44 |
|
2278 | Cylinder head stay-L 250 | 10.56 |
8148 | 5th gear MS 25T C1 | 131.44 |
|
2324 | Washer 12.1x26.2x1 | 0.88 |
8152 | 1st gear OP 33T D | 131.44 |
|
2326 | Pull rod | 22.45 |
8153 | 2nd gear OP 29T CD | 131.44 |
|
2327 | Gear lever-folding | 70.63 |
8154 | 3rd gear OP 26T C | 131.44 |
|
2336 | Pullrod | 46.42 |
8155 | 4th gear OP 24T CD | 139.33 |
|
2374 | Pivot arm | 44.77 |
8156 | 5th gear OP 21T D3 | 139.33 |
|
2376 | Sliding piece | 37.16 |
8160 | Use P/N 8847 | ||
2388 | Spring hook | 10.91 |
8162 | Use P/N 8807 | ||
2393 | Guide screw | 9.72 |
8164 | Kickstarter joint | 83.40 |
|
2395 | Tension spring | 1.93 |
8165 | Kick pivot bolt | 18.46 |
|
2396 | Pawl pin | 18.85 |
8171 | Kick ratchet | 124.60 |
|
2397 | Washer 10.6x18.2x1 | 2.97 |
8172 | Pressure spring for kickstarter gear | 12.98 |
|
2399 | Shift fork shaft | 16.86 |
8173 | Spring cup | 1.98 |
|
2406 | Short mag rear spoke | 2.94 |
8174 | Kickstarter return spring | 10.80 |
|
2407 | Spoke long mag rear 75-80 | 2.98 |
8175 | Oil seal 18x24x3 | 5.80 |
|
2408 | Spoke nipple M 4.5 | 2.55 |
8176 | Thrust washer | 5.70 |
|
2417 | Use P/N 5149 | 8177 | Kick shaft bearing | 9.80 |
||
2418 | Brake pivot | 7.92 |
8184 | Shift crank | 78.68 |
|
2419 | Brake toggle | 23.65 |
8185 | Shift lever 83-86 | 49.40 |
|
2427 | Bearing-front wheel 6202 RS | 10.78 |
8187 | Shift shaft 83-86 | 96.69 |
|
2428 | Spacer tube | 15.29 |
8191 | Shift drum 250 | 197.13 |
|
2430 | Threaded bush | 11.18 |
8194 | Stud | 3.96 |
|
2432 | Front spokes M 4x230 | 2.53 |
8195 | Shift return spring | 15.49 |
|
2433 | Front spokes M 4x243 80 | 2.53 |
8197 | Shift ratchet dog | 18.40 |
|
2434 | Rim lock rear | 20.02 |
8198 | Spring pin | 5.60 |
|
2436 | Piston ring 1st oversize 77.20 | 80.46 |
8199 | Washer | 2.20 |
|
2437 | Piston ring 2nd oversize 77.40 | 48.05 |
8200 | Pressure spring | 0.79 |
|
2439 | Piston ring 4th oversize 77.80 | 80.46 |
8201 | Shift fork spindle | 19.50 |
|
2440 | Piston ring 5th oversize 78.00 | 48.05 |
8204 | Pawl screw | 15.78 |
|
2454 | Cable bush | 1.76 |
8205 | Detent spring | 1.32 |
|
2456 | Throttle cable Magura 311 | 13.20 |
8206 | Detent pin | 17.20 |
|
2456AT | Terrycable old throttle | 32.95 |
8207 | Shifting cam cover plate | 19.60 |
|
2456AT | Terrycable for Magura 311 | 32.95 |
8208 | Stop plate | 6.70 |
|
2461 | Piston 1st oversize 67.15 | 206.70 |
8209 | Securing plate | 3.30 |
|
2462 | Piston 2nd oversize 67.35 | 206.70 |
8213 | Shift drum 5 spd | 194.00 |
|
2464 | Piston 4th oversize 67.75 | 203.70 |
8214 | Shift fork A5 | 70.10 |
|
2464W | Piston 67.70 Wiseco | 184.55 |
8215 | Shift fork H5 | 61.00 |
|
2465 | Piston 67.95 Wiseco | 184.55 |
8216 | Shift drum 490 | 197.75 |
|
2465.1 | Piston 68.2 Wiseco | 184.55 |
8217 | Shifting drum | 192.00 |
|
2465.2 | Piston 68.45 Wiseco | 184.55 |
8218 | Cylinder cpl 250 | 626.25 |
|
2465.3 | Piston 68.95 | 184.55 |
8220 | Cylinder sleeve 250 | 198.85 |
|
2467 | Piston 1st oversize 77.13 | 238.37 |
8221 | Cylinder head 250 | 193.17 |
|
2468 | Piston 2nd oversize 77.33 | 238.37 |
8222 | Cylinder base gasket 0.3mm | 10.20 |
|
2470 | Piston 4th oversize 77.93 | 238.37 |
8223 | Cylinder base gasket 0.5mm | 7.80 |
|
2471 | Piston 5th oversize 77.93 | 238.37 |
8224 | Cylinder base gasket 0.7mm | 9.40 |
|
2471.1W | Piston 78.50 Wiseco | 214.50 |
8228 | Main shaft 15t C | 248.30 |
|
2471.2W | Piston 79.00 Wiseco | 214.50 |
8229 | 2nd gear MS 18T C | 112.63 |
|
2471W | Piston 78.00 Wiseco | 214.50 |
8230 | 3rd gear MS 21T C | 138.33 |
|
2473 | Piston 1st oversize 82.12 | 314.60 |
8231 | Use P/N 8147 | ||
2474 | Piston 2nd oversize 82.32 | 314.60 |
8232 | 5th gear MS 25T C1 | 107.08 |
|
2476 | Piston 4th oversize 82.72 | 226.77 |
8233 | Circlip | 0.88 |
|
2477 | Piston 5th oversize 82.92 | 225.50 |
8234 | Thrust washer 18x25x1 | 2.88 |
|
2477.1 | Piston 83.42 Wiseco | 255.50 |
8235 | Circlip D 21x1.2 | 1.02 |
|
2477.2 | Piston 83.92 Wiseco | 255.50 |
8237 | Output shaft | 137.13 |
|
2481 | Seat cpl 72-76 | 121.00 |
8238 | 1st gear OP 31T C | 130.44 |
|
2483 | Seat cover thru 76 | 62.15 |
8239 | 2nd gear OP 29T CD | 99.15 |
|
2485 | Rubber ring for filter box | 6.93 |
8240 | 3rd gear OP 26T C | 114.15 |
|
2499 | Cylinder sleeve 250 radial | 145.30 |
8241 | 4th gear OP 24T CD | 144.14 |
|
2500A | Cylinder sleeve 250 radial | 141.40 |
8242 | 5th gear OP 22T CD1 | 114.76 |
|
2503 | Shift shaft | 73.66 |
8243 | Washer 18x27x1 | 2.77 |
|
2508 | Guide plate | 7.92 |
8244 | Spacer washer | 1.32 |
|
2509 | Kickstarter Shaft SC 4 spd. | 114.55 |
8245 | O-ring | 0.88 |
|
2510 | Hooked ratchet T1 | 6.93 |
8246 | Needle bearing only | 11.60 |
|
2512 | Grip L Magura | 9.40 |
8247 | Needle bearing w/ring 18x26x13 | 28.90 |
|
2513 | Idler gear shaft | 14.50 |
8248 | Spacer | 13.40 |
|
2531 | Transformer | 35.86 |
8249 | Sprocket 12T | 25.50 |
|
2559 | Kick shaft 78-82 | 116.60 |
8250 | Sprocket 13T | 25.50 |
|
2566 | Use P/N 2559 + 761 | 8251 | Sprocket 14T | 25.50 |
||
2567 | Tire holder rear | 25.08 |
8252 | Sprocket 15T | 18.00 |
|
2568 | Tire holder front | 25.08 |
8253 | Washer 18x25x1 | 0.88 |
|
2580 | Clutch Body | 165.74 |
8254 | Crankshaft cpl 250 | 314.00 |
|
2582 | Head gasket 450CC | 13.20 |
8255 | Crankshaft nut SW 32 | 12.30 |
|
2591 | 440 Cylinder cpl with exhaust manifold | 348.50 |
8260 | Inner ring 25x31.45x17.5 | 30.78 |
|
2593 | Cylinder head 440 | 170.50 |
8263 | Sprocket 16T | 17.40 |
|
2607 | Isolation hose | 0.70 |
8265 | Kicistarter idle gear | 68.34 |
|
2708 | Rubber washer | 2.44 |
8266 | Needle bearing 18x22x100 | 15.93 |
|
2721 | Worm for speed drive | 41.68 |
8267 | Kickstarter shaft | 103.54 |
|
2745 | Head gasket MD 250 | 8.62 |
8268 | Circlip 18x1.2 | 0.77 |
|
2753 | Crank nut 125 | 8.85 |
8269 | Kickstarter ratchet gear cpl | 149.60 |
|
2756 | Gasket for cover plate | 5.74 |
8270 | Use P/N 8269 | ||
2763 | Grankcase gasket | 10.29 |
8273 | Clutch housing cpl 250 | 257.30 |
|
2766 | Cover gasker right | 4.40 |
8274 | Clutch housing only | 111.32 |
|
2769 | Seal ring 32x52x6.5 | 13.75 |
8275 | Clutch gear 69T 250 | 202.88 |
|
2770 | Duplex chain | 72.16 |
8276 | Inner ring | 36.65 |
|
2771 | Chain guide | 9.24 |
8277 | Clutch washer | 13.50 |
|
2798 | Seal ring | 10.83 |
8278 | Hexagon nut M 16x1.0 | 4.90 |
|
2799 | Securing ring | 2.20 |
8279 | Clutch lever welded | 116.50 |
|
2828 | Rubber damper | 4.40 |
8283 | Clutch return spring | 5.52 |
|
2831 | Petcock thru 79 | 28.60 |
8284 | Crankshaft cpl 490 | 498.90 |
|
2831A | Petcock 90 Deg. | 28.60 |
8290 | Inner ring 25x31.45x13 | 27.60 |
|
2832 | Fuel line clip | 3.30 |
8295 | Cylinder cpl 400 | 833.90 |
|
2843 | Rear brake lever | 30.80 |
8297 | Cylinder sleeve 490 83-84 | 204.00 |
|
2856 | Damper rubber | 21.75 |
8298 | Decompression rel valve cpl | 109.95 |
|
2865 | Rear axle | 19.60 |
8301 | Cylinder head 490 | 130.20 |
|
2882 | Throttle MD 250 | 49.30 |
8302 | Cylinder cpl 490 | 833.90 |
|
2883 | Clutch cable | 16.50 |
8303 | Seal ring 18x22 | 1.54 |
|
2890 | Washer 10.1x18.2x0.6 | 0.77 |
8306 | Mainshaft 15T F | 183.45 |
|
2898 | Clutch lever | 20.46 |
8307 | 2nd gear MS 18T F | 104.30 |
|
2899 | Chain duplex 52L | 54.90 |
8310 | Thrust washer 21.5x31.5x1 | 2.42 |
|
2931 | Selector key | 32.80 |
8311 | Thrust washer 18x24x1 | 2.37 |
|
2937 | Bearing 6205 | 22.82 |
8312 | Inner ring 21.5x25x13 | 19.57 |
|
2944 | Use P/N 5594 | 8313 | Needle bearing 25x29x13 | 24.00 |
||
2947 | Chain, triplex 52L | 71.00 |
8315 | Output shaft 4 spd | 119.70 |
|
2967 | Cylinder head stud | 8.26 |
8316 | 1st gear OP 31T F | 130.60 |
|
2968 | Cylinder head stud | 4.78 |
8317 | 2nd gear OP 28T F | 130.60 |
|
2969 | Gasket, ignition cover | 6.77 |
8320 | Needle cage K 18x24x12 | 24.47 |
|
2982 | Crankshaft CPL | 404.80 |
8321 | Spacer bush | 3.08 |
|
3004 | Base gasket 0.3 thick | 13.11 |
8324 | Carburetor 250 | 219.77 |
|
3008 | Head light ring | 52.13 |
8325 | Carbuteror cpl V54-2 0 40 490 | 219.77 |
|
3030 | Brake light switch | 21.90 |
8326 | Vaporized No. 5 | 9.32 |
|
3044 | Intake hose | 27.50 |
8327 | Jet needle 4K2 | 6.60 |
|
3045 | Rear brake plate | 79.60 |
8329 | 3rd gear OP 25T FL1 | 103.50 |
|
3047 | Mirror | 48.80 |
8332 | 4th gear MS 24T FL | 103.73 |
|
3049 | Drive chain 120L | 115.80 |
8335 | 4th gear OP 23T F | 121.90 |
|
3053 | Seal ring 20x30x4 | 15.84 |
8340 | 3rd gear MS 21T FL | 117.35 |
|
3058 | Rotor support washer | 3.12 |
8353 | Exhaust welded 250 | 368.53 |
|
3059 | Socket screw M 8x1 LH | 2.09 |
8366 | Silencer cpl 250 | 177.94 |
|
3061 | Spring ring D 19x1.2 | 3.08 |
8368 | Securing ring 67x2.5 | 4.40 |
|
3071 | Piston cpl "A" | 218.90 |
8370 | Piston cpl 66.97 | 205.11 |
|
3072 | Pistonn ring 75.994 | 92.07 |
8371 | Piston pin 18x13x50 | 21.03 |
|
3073 | Piston cpl "B" | 218.90 |
8372 | Piston cpl 67.17 | 161.00 |
|
3093 | Use P/N 1934 | 8373 | Piston cpl 67.37 | 161.00 |
||
3094 | Spacer 3.5x16x20 L | 5.72 |
8374 | Piston cpl 67.57 | 161.00 |
|
3111 | Thrust washer 0.3 | 2.20 |
8375 | Use P/N 8375W | ||
3124 | Protection cap | 20.24 |
8375W | Piston 67.72 | 193.50 |
|
3143 | Spacer tube | 18.28 |
8376 | Use P/N 8376W | ||
3152 | Thrust washer 0.3 | 1.10 |
8376.1W | Piston 68.22 | 193.50 |
|
3164 | Air filter frame | 52.14 |
8376.2W | Piston 68.47 | 193.50 |
|
3168 | Carb cover plate | 16.06 |
8376W | Piston 67.97 | 193.50 |
|
3180 | Air box 74-75 | 60.50 |
8377 | Clamp S40/15 SKZ | 6.86 |
|
3181 | Foam air filter thru 79 | 27.04 |
8379 | Exhaust welded 490 | 368.53 |
|
3182 | Air box flange | 23.76 |
8382 | Silencer cpl 490 | 178.38 |
|
3186 | Rear brake plate cpl | 172.50 |
8450 | 4th gear OP 23T FK | 121.85 |
|
3187 | Rear brake plate only | 117.95 |
8451 | 3rd gear MS 21T FK | 116.25 |
|
3188 | Cover plate | 36.30 |
8452 | 4th gear MS 23T FK | 114.40 |
|
3189 | Pivot bolt | 15.40 |
8453 | 3rd gear OP 26T FK | 120.70 |
|
3190 | Brake lever rear | 52.17 |
8476 | Counter holder for clutch | 45.80 |
|
3196 | Wheel hub spacer | 14.08 |
8486 | Flange nut M 16x1.5 | 6.84 |
|
3198 | Spoke M 4x140x60 | 2.94 |
8492 | Tension pad | 13.40 |
|
3199 | Spoke M 4x195x45 | 2.94 |
8493 | Chain guide plate | 8.80 |
|
3203 | Sprocket | 58.30 |
8501 | Wrist pin 18x46 | 23.60 |
|
3220 | Duplex sprocket | 62.70 |
8505 | Cylinder sleeve 250 1984 | 205.84 |
|
3223 | Brake rod, silver | 18.42 |
8506 | Reed valve tongue | 12.42 |
|
3225 | Crankcase cpl 250 | 451.00 |
8507 | Frame SC490 1984 | 503.60 |
|
3227 | Rear wheel sprocket 56 T | 71.50 |
8510 | Swing arm 250/490 1984 | 275.00 |
|
3240 | Crankshaft nut | 5.94 |
8513 | Chain guide cpl | 76.65 |
|
3241 | Shift shaft 125 | 54.85 |
8514 | Chain guide pads | 9.90 |
|
3244 | Ball bearing 6203-2RS | 15.92 |
8515 | Guide roller bushing | 7.86 |
|
3254 | Lock washer | 4.40 |
8516 | Spacer-upper | 7.86 |
|
3257 | Cable rubber | 1.10 |
8519 | Use P/N 6669 | ||
3258 | Crankcase cpl 400 | 524.92 |
8521 | Throttle cpl 314 | 39.95 |
|
3261 | Silent block | 10.12 |
8522 | Clutch lever cpl | 40.70 |
|
3263 | Mount for speedometer | 27.94 |
8523 | Brake lever cpl | 44.20 |
|
3270 | Use P/N 1657 | 8524 | Flat head screw M 5x20 | 0.44 |
Copyright © 2014 SoCalMaico.com. All rights reserved. |